CCNP | Products

CCNP Plus Package

ROUTE Starter	SWITCH Starter	Plus
$60 $37	$60 $37	$57


ROUTE Command Memorizer	SWITCH Command Memorizer	ROUTE Command Memorizer
Free upgrades for 1 year	Free upgrades for 1 year	SWITCH Command Memorizer
Technical Newsletter	Technical Newsletter	Free upgrades for 1 year
90 day money back guarantee	90 day money back guarantee	Technical Newsletter
Life Long License*	Life Long License*	90 day money back guarantee
		Life Long License*

*Life long license only applies to the version of software purchased. Free upgrades for one (1) year are included in purchase. After 1 year, an upgrade fee will be applicable for any upgrades.

Overview
Products Included
Videos
Testimonials
Options explained
Author
FAQs

ROUTE Command Memorizer (ROUTE Starter and Plus Packages)

Don't let the simulations in the ROUTE 642-902 exam scare you. Use this application to make light work of them.

The ROUTE Command Memorizer is a powerful simulator application that contains over 100 scenarios to test your knowledge of the Cisco IOS.

You will learn the commands required to pass the ROUTE 642-902 Exam.

Simulation questions will be easy after you have spent time using this.

There is NO other product like this on the market today.

Topics covered include:

Chapter 1: BGP 1
Chapter 2: BGP 2
Chapter 3: BGP 3
Chapter 4: BGP 4
Chapter 5: BGP 5
Chapter 6: EIGRP 1
Chapter 7: EIGRP 2
Chapter 8: IPv6
Chapter 9 IP SLA
Chapter 10 Path Control
Chapter 11 Route Redistribution
Chapter 12 Route Filtering
Chapter 13: OSPF 1
Chapter 14: OSPF 2
Chapter 15: OSPF 3
Chapter 16: OSPF 4
Chapter 17: OSPF 5
Chapter 18: OSPF 6
Chapter 19: OSPF 7

Refer to the Products included tab for more detail

SWITCH Command Memorizer (Switch Starter and Plus Packages)

Don't let the simulations in the SWITCH 642-813 exam scare you. Use this application to make light work of them.

This powerful simulator application contains over 35 detailed scenarios to test your knowledge of the Cisco IOS.

Learn the commands required to pass the SWITCH 642-813 Exam.

Simulation questions will be easy after you have spent time using this.

There is NO other product like this on the market today.

Topics covered include:

Chapter 1: VLANs and VTP
Chapter 2: Trunk Links
Chapter 3: Private VLANs
Chapter 4: Routing Between VLANs
Chapter 5: Spanning Tree Protocol
Chapter 6: Layer 2 EtherChannel
Chapter 7: Layer 3 Etherchannel
Chapter 8: First Hop Redundancy
Chapter 9: Security
Chapter 10: DHCP
Chapter 11: Voice

Refer to the Products included tab for more detail

SWITCH Command Memorizer (Switch Starter and Plus Packages)

Don't let the simulations in the SWITCH 642-813 exam scare you. Use this application to make light work of them.

This powerful simulator application contains over 35 detailed scenarios to test your knowledge of the Cisco IOS.

Learn the commands required to pass the SWITCH 642-813 Exam.

Simulation questions will be easy after you have spent time using this.

There is NO other product like this on the market today.

Topics covered include:

Chapter 1: VLANs and VTP
- VLAN Configuration
- VTP Configuration
- VTP Modes
- Assigning Ports to VLANs
Chapter 2: Trunk Links
- Configure 802.1Q
- Configure ISL
- Allow VLANs over the trunk
- Changing the Native VLAN
Chapter 3: Private VLANs
- Promiscuous Port
- Isolated Port
- Community Port
Chapter 4: Routing Between VLANs
- Router on a Stick
- SVI Configuration
- Layer 3 Routing
Chapter 5: Spanning Tree Protocol
- Root Bridge Configuration
- Portfast
- Changing the STP Mode
- Rapid STP
- MST
- Allowing VLANs over specific Trunk links
- BPDU Guard
- ROOT Guard
- UDLD
Chapter 6: Layer 2 EtherChannel
- Channel Configuration
- PAgP
- LACP
Chapter 7: Layer 3 Etherchannel
- Channel Configuration
Chapter 8: First Hop Redundancy
- HSRP
- VRRP
- GLBP
Chapter 9: Security
- Port Security
- SSH
- Dot1 X
- DHCP Snooping
Chapter 10: DHCP
- DHCP Pool Configuration
Chapter 11: Voice
- Voice Port configuration

ROUTE Command Memorizer (ROUTE Starter and Plus Packages)

Don't let the simulations in the ROUTE 642-902 exam scare you. Use this application to make light work of them.

The ROUTE Command Memorizer is a powerful simulator application that contains over 100 scenarios to test your knowledge of the Cisco IOS.

You will learn the commands required to pass the ROUTE 642-902 Exam.

Simulation questions will be easy after you have spent time using this.

There is NO other product like this on the market today.

Topics covered include:

Chapter 1: BGP 1
- BGP neighbor relationships
- IBGP & EBGP
- MD5 passwords
Chapter 2: BGP 2
- Shutting down neighbours
- Per packet load balancing
- Next Hop Self
Chapter 3: BGP 3
- Relationships using loopbacks
- Synchronization
- Peer Groups
- Neighborship clearing
- Self reconfiguration - in & out
- Route-maps & Weight
- Weight on neighbor relationships
Chapter 4: BGP 4
- Default Local Preference
- Route-maps & Local Preferences
- Default MED
- Route-maps & MED
Chapter 5: BGP 5
- Remove Private AS numbers
- AS Path Prepending
Chapter 6: EIGRP 1
- Basic EIGRP - classful masks
- EIGRP - network masks
- EIGRP - host masks
- Show commands
- EIGRP MD5 authentication
- Load balancing
- Variance
Chapter 7: EIGRP 2
- No auto-summary
- Manual summarization
- EIGRP bandwidth usage
- EIGRP stub - summary routes
- EIGRP stub - connected & summary routes
- EIGRP stub - connected & static routes
- EIGRP passive default
- Split horizon
Chapter 8: IPv6
- IPv6 addressing
- IPv6 OSPF
- IPv6 RIP
- IPv6 static redistribution
- IPv6v4 tunnel
Chapter 9 IP SLA
- IPS SLA FTP
- IP SLA TCP
- IP SLA HTTP
Chapter 10 Path Control
- Route Maps
- Access-List
Chapter 11 Route Redistribution
- RIP and OSPF
- EIGRP and OSPF
- EIGRP and RIP
- EIGRP Metrics (Default metrics)
Chapter 12 Route Filtering
- IP Prefix lists
Chapter 13: OSPF 1
- OSPF with classful masks
- OSPF with network masks
- OSPF with host masks
- Single & multiple area OSPF
- Show commands
- Clear text authentication
- Load balancing
- Manual interface costs
Chapter 14: OSPF 2
- Router-ID
- DR Priorities
- Network type – broadcast
- Network type - point-to-multipoint
- Network type – NBMA
Chapter 15: OSPF 3
- OSPF Network types – QuickFire
Chapter 16: OSPF 4
- Virtual Links
Chapter 17: OSPF 5
- Summarization
Chapter 18: OSPF 6
- Default Route Originate
- Stub Areas
- Totally Stubby NSSA
- NSSA
- NSSA Totally Stubby
- NSSA Totally Stubby & RIP
Chapter 19: OSPF 7
- Clear text authentication
- MD5 authentication

“I find the command memorizer from David Bombal brilliant for practising the commands”

https://learningnetwork.cisco.com/thread/7237?tstart=30

learningnetwork.cisco.com

“I have purchased this application and have been very pleased with it. It is a great resource for concentrating on command syntax. There is definitely enough in it to keep you busy practicing”

https://learningnetwork.cisco.com/message/94866

learningnetwork.cisco.com

“I also purchased the command memorizer pack for $XX and have found it instrumental in helping me learn the command syntax. It is an extraordinary value, imho.”

https://learningnetwork.cisco.com/message/94866

learningnetwork.cisco.com

“I bought this from that company, it contains many things but the command memorizer is brilliant for quickly practising your commands on all parts of CCNA and CCENT.”

https://learningnetwork.cisco.com/message/50916?tstart=0

learningnetwork.cisco.com

“I highly recommend to get this Study Package”

https://learningnetwork.cisco.com/message/88656

learningnetwork.cisco.com

“The following two things are a MUST BUY”

https://learningnetwork.cisco.com/message/95642

learningnetwork.cisco.com

“have found it to be a wonderful tool to exercise fingers and mind”

“Passed with 987 in no small part to the MPLS Command Memorizer :-)”

http://subnettingmadeeasy.blogspot.com/2010/04/mpls-command-memorizer-review.html

learningnetwork.cisco.com

“My first impression of the product is very good”

CCIE Candidate Blog

“They have really good scenarios to work on”

CCIE Candidate Blog

“If the rest of the EBook looks like those few task I tried, it’s a MUST HAVE product!”

Cauew.blogspot.com

“So far I am impressed and I can already see a clear niche for it in my CCIE study plans”

The Ferret’s Corner

The Ferret's Corner

“I have used since passing the written, I would say the CCIE Command Memorizer would be a great help to preparing for the written”

The Ferret’s Corner

The Ferret's Corner

“I am too using the CCIE Command Memorizer. It’s a cool product :-) “

Nickelby Thame

“have found it to be a wonderful tool to exercise fingers and mind”

Subnettingmadeeasy.blogspot.com

“Passed with 987 in no small part to the MPLS Command Memorizer :-)”

Subnettingmadeeasy.blogspot.com

CCNP Plus Package

Plus Package:

This combo package contains both the ROUTE 642-902 and SWITCH 642-813 commands memorizers.

These will help you prepare for both the ROUTE and SWITCH CCNP exams.

ROUTE Topics covered include:

Chapter 1: BGP 1
Chapter 2: BGP 2
Chapter 3: BGP 3
Chapter 4: BGP 4
Chapter 5: BGP 5
Chapter 6: EIGRP 1
Chapter 7: EIGRP 2
Chapter 8: IPv6
Chapter 9 IP SLA
Chapter 10 Path Control
Chapter 11 Route Redistribution
Chapter 12 Route Filtering
Chapter 13: OSPF 1
Chapter 14: OSPF 2
Chapter 15: OSPF 3
Chapter 16: OSPF 4
Chapter 17: OSPF 5
Chapter 18: OSPF 6
Chapter 19: OSPF 7

SWITCH Topics covered include:

Chapter 1: VLANs and VTP
Chapter 2: Trunk Links
Chapter 3: Private VLANs
Chapter 4: Routing Between VLANs
Chapter 5: Spanning Tree Protocol
Chapter 6: Layer 2 EtherChannel
Chapter 7: Layer 3 Etherchannel
Chapter 8: First Hop Redundancy
Chapter 9: Security
Chapter 10: DHCP
Chapter 11: Voice

CCNP Route Starter Package

ROUTE Starter Package:

The ROUTE command memorizer is designed to help you pass the ROUTE 642-902 CCNP Exam.

It contains over 100 scenarios and covers all the topics in the CCNP ROUTE curriculum.

ROUTE Topics covered include:

Chapter 1: BGP 1
Chapter 2: BGP 2
Chapter 3: BGP 3
Chapter 4: BGP 4
Chapter 5: BGP 5
Chapter 6: EIGRP 1
Chapter 7: EIGRP 2
Chapter 8: IPv6
Chapter 9 IP SLA
Chapter 10 Path Control
Chapter 11 Route Redistribution
Chapter 12 Route Filtering
Chapter 13: OSPF 1
Chapter 14: OSPF 2
Chapter 15: OSPF 3
Chapter 16: OSPF 4
Chapter 17: OSPF 5
Chapter 18: OSPF 6
Chapter 19: OSPF 7

CCNP Switch Starter Package

SWITCH Starter Package:

The SWITCH command memorizer is designed to help you pass the SWITCH 642-813 CCNP Exam.

It contains over 100 scenarios and covers all the topics in the CCNP SWITCH curriculum.

SWITCH Topics covered include:

Chapter 1: VLANs and VTP
Chapter 2: Trunk Links
Chapter 3: Private VLANs
Chapter 4: Routing Between VLANs
Chapter 5: Spanning Tree Protocol
Chapter 6: Layer 2 EtherChannel
Chapter 7: Layer 3 Etherchannel
Chapter 8: First Hop Redundancy
Chapter 9: Security
Chapter 10: DHCP
Chapter 11: Voice

*Life long license only applies to the version of software purchased. Free upgrades for one (1) year are included in purchase. After 1 year, an upgrade fee will be applicable for any upgrades.

DAVID BOMBAL

Qualifications: CCIE #11023, CCSP, CCIP, CCSI, CCNP, CCDP, CCVP

David Bombal

David Bombal (CCIE #11023) passed his Cisco Certified Internetwork Expert Routing and Switching exam in January 2003.

David is one of a small percentage of Cisco Engineers that pass their CCIE labs on their first attempt.

David is also a Cisco Certified Systems Instructor (CCSI #22787) and has been training Cisco courses for over 10 years.

David started working with Cisco Unified Communications Manager when it was still called Cisco Call Manager and has been deploying, troubleshooting and teaching Unified Communications products since version 3.0.

David has delivered instructor led courses in various countries around the world covering a wide range of Cisco topics from CCNA to CCIE.

He has also personally developed Cisco engineer utilities such as the VPN Config Generator, software, training materials, EBooks, videos and other products which are used throughout the world.

David has designed, implemented and managed networks ranging from single sites to those that span 50 countries.

David has multiple qualifications including

Bachelor of Commerce Degree (Majors: Accountancy and Information Systems)
CCIE #11023
CCSI #22787
CCVP (CCNP Voice)
CCSP
CCNP
CCDP
CCIP
INFOSEC
CCDA
CCNA
4012 Recognition
MCT
MCSE

I entered my username and password but I get the error: Username and Password Combination is Invalid?

Please note that the username and password required by the EBook software is NOT the same as your username and password used to login to ConfigureTerminal.com. Each EBook has it's own unique username and password.

Please make sure that you have keyed in the information properly, without any spaces before or after the username and password. User and Passwords are cases sensitive. Passwords are all numbers.

Please check the username and password that should be used here: "What username and password do I use?"

Do I have to purchase a new license every year?

No, your license is indefinite for the current version of software you have (if you purchased the software, rather than rented it). You are entitled to free upgrades for 1 year after purchase. Thereafter you can either continue with your current software version or pay an upgrade fee to upgrade to the newest versions of software.

Can I print the EBooks?

A lot of the EBooks contain flash presentations and thus cannot be printed.

If you would like a printed copy of certain parts of your EBook(s), please contact us and we will send you a copy in PDF format. The pages will be watermarked with your name and e-mail address so as to ensure that unauthorized copies are not given away.

I can’t log into the website?

If you do not have a username & password or have not been allocated one by use, please create a new one by clicking on the create username icon.

If you have a username and password already, please click on the forgot my password link and a token will be e-mailed to you so that you can reset your password.

Refund Policy and Guarantee?

90 day Guarantee

Your Satisfaction Guaranteed

I am so confident that our training, product offerings, real world utilities and customer service is the best value for your money that I am prepared to offer you a 90 day money back guarantee.

I have seen and heard of far too many computer training companies that may take your money, deliver a poorly designed course or product and never offer a refund. Unfortunately, even if you don’t like the training or product, you are out of pocket.

Our 90 day money back guarantee is simple – if you are not satisfied with our training, our service or our support for any reason, return your course within 90 days for a FULL REFUND (up to a maximum of $397).

We will take all the risk so that you can confidently work towards your career goals.
Even if you opened the course and return it on the 89th day, we will honor our iron-clad guarantee!

This is my promise to you.
To your success!
David Bombal
Founder & President of ConfigureTerminal.com

Do I need to be connected to the Internet when using the software?

An Internet connection is required for the initial software registration. Thereafter, the software can be used offline.

How do I move my software to another machine?

To move your license and software to another machine, do the following:

Uninstall the software on your current machine
Install the software on your new machine
Use the same license codes to unlock your software

We know that a lot of Cisco engineers want to study at home, at work and on the road. We have thus increased the license count of all software to allow three (3) simultaneous installations on machines that you either own or personally use. This should cover you for:

* A home machine
* A work machine
* A laptop

The download links have expired. How do I download the software?

Please contact us and we will send you new links to download the software.

Fill out the form here.

My hard drive crashed. What do I do now?

Please install the software on your new hard drive / machine using the same unlock codes.

Please contact us if you have lost your software or unlock codes.

How is the software delivered? Can I download the software?

All our software is downloadable directly from our website. Once you have purchased the software, you will be provided with download links.

There are various files but all software will be less than 100 MB