
*Life long license only applies to the version of software purchased. Free upgrades for one (1) year are included in purchase. After 1 year, an upgrade fee will be applicable for any upgrades.
Learn the HP E-Series and A-Series (Plus Package) Command Line Interface.
Our command memorizers cover all the labs in the
- HP AIS course - HP E-Series Networking Technologies
- HP AIS course - HP A-Series Networking Technologies
This product is for:
- New engineers starting their careers in HP networking
- HP Engineers wanting to upgrade their certifications
- Cisco Network Engineers wanting to learn HP networking products
- Anyone planning to take either the HP0-Y30 or HP2-Z18 exams
This application will enable you to learn the CLI commands for both
- E-Series / Procurve Switches
- A-Series / H3C Routers and Switches
The HP AIS E-Series Command Memorizer is a powerful simulator application that contains over 100 scenarios to test your knowledge of the HP Provision CLI (Procurve).
The HP AIS A-Series Command Memorizer is a powerful simulator application that contains over 45 scenarios to test your knowledge of the HP Comware CLI (H3C).
You will learn commands for both the real world and the command required to pass the HP exams - HP0-Y30 and HP2-Z18.
Please note that knowledge of both A-Series and E-Series is required for the exam, so it is recommended that you purchase the PLUS package.
There is NO other product like this on the market today.
Comments from independent people on the internet:
“I find the command memorizer from David Bombal brilliant for practising the commands”
“I have purchased this application and have been very pleased with it. It is a great resource for concentrating on command syntax. There is definitely enough in it to keep you busy practicing”
“I use it mostly on the train, plane and in my hotel while i travel (sic)”
“I also purchased the command memorizer pack and have found it instrumental in helping me learn the command syntax. It is an extraordinary value, imho.”
“They have lots of other things in their package as well but I would have paid the money just for the memorizer”
“I highly recommend to get this Study Package (sic)”
Here is a summary of the benefits you receive
-
Over 100 E-Series and over 45 A-Series simulations (plus package)
-
Instant access
-
Supports latest version of the HP AIS blueprint
-
Delivered as a downloadable file which you can run locally
-
Learn the commands that can help you pass
-
Don't waste valuable time trying to remember commands - have them at your fingertips
-
-
No need to be connected to a router or switch
-
You can practice commands anywhere
-
-
Check your knowledge of sections
-
Make sure you know all the relevant sections
-
-
Don't waste valuable time
-
No need to set up equipment - just run this on your laptop
-
-
Practice focused configuration scenarios
-
Practice Specific technologies to make sure you know a topic
-
-
No need to buy equipment to practice these scenarios
-
No need to set up equipment – just run this on your laptop
-
-
Start with the basics and quickly move to complicated scenarios
-
See where you stand with regards to a technology
-
-
Answers are provided so you can learn quickly
-
Answers to specific commands are available immediately
-
-
Try, try and try
-
No limit on the number of times you can redo the questions
-
HP AIS E-Series Command Memorizer (E-Series Package and AIS Plus Package)
Don't let the required knowledge of Provision CLI commands in the AIS exam scare you. Use this application to make light work of them.The HP AIS E-Series Command Memorizers is a powerful simulator application, which contains over 100 scenarios to test your knowledge of the HP Provision software used on HP E-Series (Procurve) switches.
You will learn the commands required to pass the AIS HP0-Y30 or HP2-Z18 Exams.
There is NO other product like this on the market today.
Refer to the Products included tab for more detail
HP A-Series Command Memorizer (A-Series Package and AIS Plus Package)
Don't let the required knowledge of HP A-Series (H3C) CLI commands in the AIS exam scare you. Use this application to make light work of them.The HP AIS A-Series Command Memorizers is a powerful simulator application, which contains over 45 scenarios to test your knowledge of the HP Comware software used on HP A-Series (H3C) routers and switches.
You will learn the commands required to pass the AIS HP0-Y30 or HP2-Z18 Exams.
There is NO other product like this on the market today.
Refer to the Products included tab for more detail
Binary, Decimal, Hexadecimal Converter (Ultimate Package)
Use this calculator to convert Decimal to Binary to Hexadecimal easily. The calculator will also work out the inverse masks at the click of a button.
Refer to the Products included tab for more detail
2 Years of technical newsletters (All Packages)
Every month for 24 months, you will receive a technical newsletter.
Refer to the Products included tab for more detail
- HP AIS E-Series Command Memorizer
- HP AIS A-Series Command Memorizer
- Binary, Decimal, Hexadecimal Converter
HP AIS E-Series Command Memorizer (E-Series Package and AIS Plus Package)
Don't let the required knowledge of Provision CLI commands in the AIS exam scare you. Use this application to make light work of them.
The HP AIS E-Series Command Memorizers is a powerful simulator application, which contains over 100 scenarios to test your knowledge of the HP Provision software used on HP E-Series (Procurve) switches.
You will learn the commands required to pass the AIS HP0-Y30 or HP2-Z18 Exams.
There is NO other product like this on the market today.
Topics covered include:
- Chapter 1: Basic Commands
- Show running configuration
- Show running configuration status
- Show saved configuration
- Show system software version
- Save configuration
- Configure a management IP address
- Configure VLAN 1
- Change device name
- Shutdown interfaces
- Set interface speed and duplex
- Change MDI / MDIX modes
- Change port descriptions
- Show configuration for specific interfaces
- Display command history
- Repeat commands
- Delete saved configuration
- Traceroute to a device
- Ping with repeat options
- Reload the switch
- Set the switch time
- Display switch IP addresses
- Display lldp information for neighboring devices
- Display lldp configuration
- Display local lldp information
- Display lldp information on a specific port
- Display lldp traffic
- Display cdp neighbor information - summary
- Display cdp neighbor information – detailed
- Show flash
- Display interface list in brief format
- Display specific information for an interface (vlan, status info)
- Display a dynamic view of switch interfaces
- Start menu
- Configure a manager username and password
- Answer switch questions
- Chapter 2: Operating System and configuration files
- Show config files
- Show contents of a specific config file
- Change the default startup configuration file
- Change the secondary and primary configuration files
- Copy a config file and to another
- Restart the system and allow a user to specify the boot image
- View the contents of the USB drive
- Copy system image to USB
- Copy system image to TFTP server
- Boot the system from the secondary flash image
- Boot the system from the primary flash image
- Set the primary image as the default
- Copy the startup config to the USB drive
- Copy the startup config to a TFTP server
- Show all logging information
- Show logging information in reverse chronological order
- Show logging information for specific keywords
- Clear the log
- Chapter 3: VLANs and IP Services
- Configure multiple switches with management IP addresses
- Create VLANS
- Untag individual ports
- Untag multiple ports
- Tag ports
- Configure DHCP helper addresses
- Configure switch default gateways
- Configure syslog
- Configure SNTP
- Configure DNS
- Show tech
- Show tech options
- Disable http web management
- Disable telnet
- Display the ARP Cache
- Display the MAC address table
- Configure Inter VLAN Routing
- Chapter 4: Securing Management Access
- Configure manager password
- Configure operator password
- Configure manager username and password
- Configure operator username and password
- Disable the clear and reset buttons
- Disable password recovery
- Disable the USB port
- Display passwords in configuration files
- Configure authorized managers subnet
- Configure authorized operators subnet
- Enable SSH switch management
- Display switch public key
- Generate self-signed certificate
- Enable SSL management on switch
- Delete SSH keys
- Delete SSL keys
- Delete certificate
- Enable SFTP
- Enable SNMPv2
- Create SNMP read and write communities
- Enable SNMPv3
- Create SNMPv3 permissions
- Chapter 5: Link Aggregation (Trunking)
- Configure LACP trunking between switches
- Tag and untag trunks correctly
- Configure static trunking with no negotiation
- Chapter 6: Spanning Tree
- Enable Spanning Tree
- Configure Spanning Tree priorities
- 4096, 8192, 32768
- Display spanning tree information
- Chapter 7: Static Routes
- Configure Static Routes on multiple devices in multiple topologies
- Configure Inter VLAN routing
- Chapter 8: RIP
- Enable RIP on multiple devices in multiple topologies
- Configure Inter VLAN routing
HP A-Series Command Memorizer (A-Series Package and AIS Plus Package)
Don't let the required knowledge of HP A-Series (H3C) CLI commands in the AIS exam scare you. Use this application to make light work of them.
The HP AIS A-Series Command Memorizers is a powerful simulator application, which contains over 45 scenarios to test your knowledge of the HP Comware software used on HP A-Series (H3C) routers and switches.
You will learn the commands required to pass the AIS HP0-Y30 or HP2-Z18 Exams.
There is NO other product like this on the market today.
Topics covered include:
- Chapter 1: Basic Commands Part 1
- Show running configuration
- Save switch configuration
- Show saved configuration
- Show system software version
- Configure a management IP address
- Change device name
- Erase the saved configuration
- Display recently used commands
- Trace to a destination
- Ping with options
- Reload the switch
- Enable monitoring of screen output
- Chapter 2: Basic Commands Part 2
- Set switch time
- Display layer 3 interfaces
- Enable spanning tree
- Display spanning tree
- Display flash
- Enable tracing across router
- Delete startup configuration file
- Undelete startup configuration file
- Permanently delete startup configuration file
- Empty recycle bin
- Create a user account and enable telnet
- Set local user password
- Chapter 3: Basic Commands Part 3
- Enable telnet and configure VTY lines
- Configure VTY options such as timeouts and privilege levels
- Create a super password
- Enable interfaces
- Configure descriptions on interfaces
- Configure IP address on management VLAN
- Display lldp neighbour information
- Display the ARP cache
- Display the MAC address table
- Display diagnostic information
- Turn off debugging
- Chapter 4: VLANs and Link Aggregation Part 1
- Enable link aggregation between switches
- Configure VLAN access across bridge aggregation links
- Configure routed ports
- Chapter 5: VLANs and Link Aggregation Part 2
- Configure a “router on a stick”
- Configure VLANS on a router
- Configure subinterfaces on a router
- Configure MSTP
- Configure STP regions
- Configure STP instances
- Configure STP edge ports
- Configure IRF
- Configure IRF member ID’s and priorities
- Display IRF settings
- Chapter 6: Static Routes
- Configure Static Routes on multiple devices in multiple topologies
- Configure Static Route preferences
- Remove static routes
- Chapter 7: RIP
- Enable RIP on multiple devices in multiple topologies
- Set silent interfaces
- Set RIP version
- Configure RIP summary routes
Binary, Decimal, Hexadecimal Converter (Plus Package)
Use this calculator to convert Decimal to Binary to Hexadecimal easily. The calculator will also work out the inverse masks at the click of a button.
Topics covered include:
- Decimal to Binary & Inverse
- Decimal to Hexadecimal & Inverse
- Binary to Decimal & Inverse
- Binary to Hexadecimal & Inverse
- Hexadecimal to Decimal & Inverse
- Hexadecimal to Binary & Inverse

![]() Dave, ![]() |
![]() Phil Dasilva
|
![]() David, ![]() |
![]() Steve Britton
United Kingdom
|
![]() David, ![]() |
![]() Todd Gathright
|
![]() David ![]() |
![]() Kevin Nagberi
|
![]() Hello David, ![]() |
![]() Duncan McMahon
|
![]() Hi David, ![]() |
![]() Paul Mcsharry
|
![]() This is a very good way to test what you know; and instead of a static dry explanations, ![]() |
![]() John C. Bogard
|
![]() Hi David, ![]() |
![]() Cheers!
|
![]() I think the new version of the command memorizer is brilliant and has been a massive ![]() |
![]() Casey Lightner
|
All of the following are independent reviews on the internet and no one has been paid or asked to make these comments:
“I find the command memorizer from David Bombal brilliant for practising the commands”
https://learningnetwork.cisco.com/thread/7237?tstart=30
“I have purchased this application and have been very pleased with it. It is a great resource for concentrating on command syntax. There is definitely enough in it to keep you busy practicing”
https://learningnetwork.cisco.com/message/94866
“I also purchased the command memorizer pack for $40 and have found it instrumental in helping me learn the command syntax. It is an extraordinary value, imho.”
https://learningnetwork.cisco.com/message/94866
“I bought this from that company, it contains many things but the command memorizer is brilliant for quickly practising your commands on all parts of CCNA and CCENT.”
https://learningnetwork.cisco.com/message/50916?tstart=0
“I highly recommend to get this Study Package”
https://learningnetwork.cisco.com/message/88656
“The following two things are a MUST BUY”
https://learningnetwork.cisco.com/message/95642
“have found it to be a wonderful tool to exercise fingers and mind”
“Passed with 987 in no small part to the MPLS Command Memorizer :-)”
http://subnettingmadeeasy.blogspot.com/2010/04/mpls-command-memorizer-review.html

Plus:
This package contains both the E-Series and A-Series command memorizers. It is thus recommend if you are preparing for either the HP0-Y30 or HP2-Z18 exams.
We cover all the labs in the AIS courses:
- HP E-Series Networking Technologies
- HP A-Series Networking Technologies
Contains the following:
- Over 100 scenarios on HP E-Series / Procurve Switches
- Over 45 scenarios on HP A-Series / H3C Routers and Switches
- Binary, Decimal, Hexadecimal Converter
- Technical Newsletter
- Free upgrades for 1 years
- 90 day money back guarantee
- Life Long License *

E-Series:
This package contains only the E-Series command memorizer. It is thus recommend if you are preparing for either the HP0-Y30 or HP2-Z18 exams if you are comfortable with the commands covered in the HP AIS course - HP A-Series Networking Technologies.
Note: No HP A-Series / H3C commands are covered.
We cover all the labs in the AIS courses:
- HP AIS course - HP E-Series Networking Technologies
Contains the following:
- Over 100 scenarios on HP E-Series / Procurve Switches
- Technical Newsletter
- Free upgrades for 1 years
- 90 day money back guarantee
- Life Long License *

A-Series:
This package contains only the A-Series command memorizer. It is thus recommend if you are preparing for either the HP0-Y30 or HP2-Z18 exams if you are comfortable with the commands covered in the HP AIS course - HP E-Series Networking Technologies.
Note: No HP A-Series / H3C commands are covered.
We cover all the labs in the AIS courses:
- HP AIS course - HP A-Series Networking Technologies
Contains the following:
- Over 45 scenarios on HP A-Series / H3C Routers and Switches
- Technical Newsletter
- Free upgrades for 1 years
- 90 day money back guarantee
- Life Long License *
*Life long license only applies to the version of software purchased. Free upgrades for one (1) year are included in purchase. After 1 year, an upgrade fee will be applicable for any upgrades.
DAVID BOMBAL
Qualifications: CCIE #11023, CCSP, CCIP, CCSI, CCNP, CCDP, CCVP

David Bombal (CCIE #11023) passed his Cisco Certified Internetwork Expert Routing and Switching exam in January 2003.
David is one of a small percentage of Cisco Engineers that pass their CCIE labs on their first attempt.
David is also a Cisco Certified Systems Instructor (CCSI #22787) and has been training Cisco courses for over 10 years.
David started working with Cisco Unified Communications Manager when it was still called Cisco Call Manager and has been deploying, troubleshooting and teaching Unified Communications products since version 3.0.
David has delivered instructor led courses in various countries around the world covering a wide range of Cisco topics from CCNA to CCIE.
He has also personally developed Cisco engineer utilities such as the VPN Config Generator, software, training materials, EBooks, videos and other products which are used throughout the world.
David has designed, implemented and managed networks ranging from single sites to those that span 50 countries.
David has multiple qualifications including
- Bachelor of Commerce Degree (Majors: Accountancy and Information Systems)
- CCIE #11023
- CCSI #22787
- CCVP (CCNP Voice)
- CCSP
- CCNP
- CCDP
- CCIP
- INFOSEC
- CCDA
- CCNA
- 4012 Recognition
- MCT
- MCSE
Please note that the username and password required by the EBook software is NOT the same as your username and password used to login to ConfigureTerminal.com. Each EBook has it's own unique username and password.
Please make sure that you have keyed in the information properly, without any spaces before or after the username and password. User and Passwords are cases sensitive. Passwords are all numbers.
Please check the username and password that should be used here: <a href="/cisco-ccent-ccna/configureterminalcom-faqs/1-CCNA%20ICND2%20640%20802%20640%20811/15-What%20username%20and%20password%20do%20I%20use.html">"What username and password do I use?</a>
Answer:
As a reputable company we do not sell real exam questions. That would break the NDA from Cisco and various laws. Our questions are similar in style to the actual exam. They should be used to test your knowledge of the Cisco material, not to just "pass the exam" using a brain dump. The questions will enable you to make sure you know the exam topics.
We do not sell CCNA brain dumps.
No, your license is indefinite for the current version of software you have (if you purchased the software, rather than rented it). You are entitled to free upgrades for 1 year after purchase. Thereafter you can either continue with your current software version or pay an upgrade fee to upgrade to the newest versions of software.
To find out what username and password to use, do the following:
CCNA Command Memorizer Part 1: Username and Password are displayed on the first page - above the table of contents
CCNA Command Memorizer Part 2: Username and Password are displayed on the first page - above the table of contents
Mentored CCNA Lab Guide: Username and Password are displayed on the first page - above the table of contents
IP Subnetting made easy: Click on chapter 1 - Read me first page. Username and Password are displayed at the top of the page
Securing Cisco Devices: Username and Password are displayed on the first page - above the table of contents
Cool IOS Commands Ebook:
Please try the following:
Cool IOS Commands EBook:
Username: learn
Password: 98127256376
If those don’t work, please try there:
Username: learn
Password: 337365346
The likely cause of this error would be a corrupted eBook file.
Please download the eBook again. When you are prompted to download the eBook, choose "save" and save it on your desktop.
If you have trouble downloading the eBook or the download links have expired, please contact us.
This depends on the product purchased.
EBooks:
EBooks are downloable from our website.
Videos:
Videos are streamed online and are shipped in MP4 format. Videos are not downloadable.
Command Memorizers:
Command Memorizers are downloable from our website.
Software:
All software is downloable from our website.
If you loose your software, (or your laptop is lost or stolen for example), just contact us and we will give new download links.
Thus - you can download the software again at any time. There is no need for you to store a local copy if you don't want to.
We do not limit the number of times you can download the software. However, the number of concurrent installations is limited.
To move your license and software to another machine, do the following:
1. Uninstall the software on your current machine
2. Install the software on your new machine
3. Use the same license codes to unlock your software
We know that a lot of Cisco engineers want to study at home, at work and on the road. We have thus increased the license count of all software to allow three (3) simultaneous installations on machines that you either own or personally use. This should cover you for:
* A home machine
* A work machine
* A laptop
You should have been redirected to our downloads page immediately after your payment was processed. Please contact us and we will manually issue give you the download links and unlock codes.
Click here to contact us.
It is against the Cisco NDA to sell brain dumps. We sell test questions, software and EBooks that we have written ourselves.
You are entitled to free upgrades for one (1) year after your date of purchase.
Thereafter, you will be required to pay a discounted upgrade fee for another year of free upgrades.
The bundle consists of files of various sizes. The total size of all files is:
CCNA Bundle: About 70 Mb
ICND1/ICND2 Bundle: About 80 Mb
CCNA Voice Command Memorizer: About 10 Mb
An Internet connection is required for the initial software registration. Thereafter, the software can be used offline.
If you do not have a username & password or have not been allocated one by use, please create a new one by clicking on the create username icon.
If you have a username and password already, please click on the forgot my password link and a token will be e-mailed to you so that you can reset your password.
This depends on the product purchased.
EBooks:
EBooks can be provided in PDF format. Just ask us and we will send you a copy of the EBook in PDF. Please note that some of the PDFs contain flash presentations and these may not function.
Videos:
Videos are streamed online and are shipped in MP4 format. You can thus view these on Apple devices.
Command Memorizers:
Older versions run only on Microsoft Windows. We are in the process of upgrading the Command Memorizers to use Java and these work on Apple MAC.
Software:
Other software requires Microsoft Windows to run and the Apple MAC operating system is not natively supported.
The recommendation from Apple is:
"Have a Windows application you need to use once in a while? No problem. Every new Mac lets you install Windows XP and Vista and run them at native speeds, using a built-in utility called Boot Camp.
Setup is simple and safe for your Mac files. After you’ve completed the installation, you can boot up your Mac using either Mac OS X or Windows. (That’s why it’s called
I am often asked to suggest an order of study of the materials. This will vary from candidate to candidate, but I would suggest that you follow the following order of study:
-
Learn Binary and Hexadecimal EBook
-
IP Subnetting Made Easy EBook
-
Securing Cisco Devices EBook
-
CCNA Knowledge Verifier Software
-
CCNA Sims Software
-
CCNA Command Memorizer Part 1 EBook
-
CCNA Command Memorizer Part 2 EBook
-
Cool IOS Commands EBook
-
Binary Decimal Hexadecimal Software
-
Config Register Configurator Software
Forums:
Please log into ConfigureTerminal.com to gain access to our forums (create an account if you don’t already have one). Here you will have access to certified instructors who will answer your questions regarding CCNA. This will also allow you to share your study experiences with others.
128 bit encryption is required in Internet Explorer (not firefox or other browsers). Please make sure it is enabled by doing the following:
- Set "Enable protected mode"
You can get to the "enable protected mode" checkbox in Internet Explorer 8 by:
-
Open Internet Explorer
-
Click Tools
-
Click Internet Options
-
Click the Security tab
-
The check box will be under the slider for the level of security
Note: If you have a website as "Trusted" then you have to enable protected mode for trusted sites as well if you want them to be encrypted.
This depends on the product purchased.
EBooks:
EBooks can be provided in PDF format. Just ask us and we will send you a copy of the EBook in PDF. Please note that some of the PDFs contain flash presentations and these may not function.
Videos:
Videos are streamed online and are shipped in MP4 format. You can thus view these on Linux devices.
Command Memorizers:
Older versions run only on Microsoft Windows. We are in the process of upgrading the Command Memorizers to use Java and these work on Linux.
Software:
Other software requires Microsoft Windows to run and the Linux Operating System is not natively supported.
Please see the following documentation on how to run VMWare on Ubuntu and run out applications within VMWare:
https://help.ubuntu.com/community/VMware/Tools
and here:
http://ubuntuforums.org/showthread.php?t=183209
To view the images and display the correct formatting of our monthly newsletters, make sure that you have HTML enabled in your e-mail application.
To fix this, do the following:
Microsoft Express - click on this link: http://support.microsoft.com/kb/843018
Microsoft Outlook - click on this link: http://office.microsoft.com/en-us/outlook/HA010549231033.aspx
You can keep the current version indefinitely. You get 1 year's free upgrades. After 1 year, you can just keep using the version you have if you don't want to upgrade. You will not be forced to upgrade if you don't want to.
You can pay using WorldPay.
WorldPay accept credit cards from most countries in the world.
On most pages, please scroll to the end of the page and there will be an option to pay using WorldPay. Please contact us if you are not sure how to make your payment or you cannot see the WorldPay option.
All our software is downloadable directly from our website. Once you have purchased the software, you will be provided with download links.
There are various files but all software will be less than 100 MB
90 day Guarantee
Your Satisfaction Guaranteed
I am so confident that our training, product offerings, real world utilities and customer service is the best value for your money that I am prepared to offer you a 90 day money back guarantee.
I have seen and heard of far too many computer training companies that may take your money, deliver a poorly designed course or product and never offer a refund. Unfortunately, even if you don’t like the training or product, you are out of pocket.
Our 90 day money back guarantee is simple – if you are not satisfied with our training, our service or our support for any reason, return your course within 90 days for a FULL REFUND (up to a maximum of $397).
We will take all the risk so that you can confidently work towards your career goals.
Even if you opened the course and return it on the 89th day, we will honor our iron-clad guarantee!
This is my promise to you.
To your success!
David Bombal
Founder & President of ConfigureTerminal.com
We know that a lot of Cisco engineers want to study at home, at work and on the road. We have thus increased the license count of all software to allow three (3) simultaneous installations on machines that you either own or personally use. This should cover you for:
- A home machine
- A work machine
- A laptop
Yes, Windows 7 is supported.
Minimum Hardware Requirements:
- Processor: 400 MHz
- Memory: 128 Mb
- Hard drive: 350 Mb
- Display: 800 x 600 256 colors
Recommended Hardware:
- Processor: 800 MHz
- Memory: 256 Mb
- Hard drive: 1 Gb
- Display: 1024 x 768 High Color (16-bit)
Supported Operating Systems:
x86 32-bit based systems
- Microsoft Windows 98
- Microsoft Windows 98 Second Edition
- Microsoft Windows 2000 Professional with SP4
- Microsoft Windows 2000 Server with SP4
- Microsoft Windows 2000 Advanced Server with SP4
- Microsoft Windows 2000 Datacenter Server with SP4
- Microsoft Windows XP Professional with SP2
- Microsoft Windows XP Home Edition with SP2
- Microsoft Windows XP Media Center Edition 2002 with SP2
- Microsoft Windows XP Media Center Edition 2004 with SP2
- Microsoft Windows XP Media Center Edition 2005
- Microsoft Windows XP Tablet PC Edition with SP2
- Microsoft Windows XP Starter Edition
- Microsoft Windows Millennium Edition
- Microsoft Windows Server 2003 Standard Edition
- Microsoft Windows Server 2003 Enterprise Edition
- Microsoft Windows Server 2003 Datacenter Edition
- Microsoft Windows Server 2003 Web Edition
- Microsoft Windows Vista Starter
- Microsoft Windows Vista Home Basic
- Microsoft Windows Vista Home Premium
- Microsoft Windows Vista Business
- Microsoft Windows Vista Enterprise
- Microsoft Windows Vista Ultimate
- Microsoft Windows 7 Starter
- Microsoft Windows 7 Home Basic
- Microsoft Windows 7 Home Premium
- Microsoft Windows
Part of the bundle contains applications and EBooks that are single exe files (not standard installation files).
You will need to save the file to a directory on your computer and then double click the file to start it. These files do not install like a standard windows program and are thus not available through the start menu. Whenever you want to start the software, just double click on the exe file.
Examples of applications / Ebooks that are single EXE files are:
- Mentored CCNA Workbook
- Cool IOS Commands
- Learn Binary and Hexadecimal
- Securing Cisco Devices
- IP Subnetting made easy
- CCNACommandMemorizerPart1
- CCNACommandMemorizerPart2
To find out what username and password to use, do the following:
CCNA Command Memorizer Part 1: Username and Password are displayed on the first page - above the table of contents
CCNA Command Memorizer Part 2: Username and Password are displayed on the first page - above the table of contents
Mentored CCNA Lab Guide: Username and Password are displayed on the first page - above the table of contents
IP Subnetting made easy: Click on chapter 1 - Read me first page. Username and Password are displayed at the top of the page
Securing Cisco Devices: Username and Password are displayed on the first page - above the table of contents
Cool IOS Commands Ebook:
Please try the following:
Cool IOS Commands EBook:
Username: learn
Password: 98127256376
If those don’t work, please try there:
Username: learn
Password: 337365346
Please install the software on your new hard drive / machine using the same unlock codes.
Please contact us if you have lost your software or unlock codes.
A lot of the EBooks contain flash presentations and thus cannot be printed.
If you would like a printed copy of certain parts of your EBook(s), please contact us and we will send you a copy in PDF format. The pages will be watermarked with your name and e-mail address so as to ensure that unauthorized copies are not given away.
If you have any problems with the username and password validating your eBook, please check the following...
-
Make sure CAPS LOCK is off.
-
Spam filters and anti-virus software must be turned off.
-
No Firewall software running (it may stop you from registering)
-
Using the number zero and not the letter O in the password.
-
You must be online when registering.
Your Internet connection may be slow, or a firewall / proxy is blocking the software.
An Internet connection is only required for the initial software registration. After that, the software will start without an Internet connection. Please try disabling all network connections and then starting the software. If the software starts quickly, the cause is a slow Internet connection / firewall.
If the software still loads / starts slowing even when all network connections have been disabled, please contact us.
Yes, after purchase, you will be redirected to our membership site where you can access our online streaming service.
Depending on which package you purchase, a DVD will also be shipped to the address you specify.



